您好!欢迎访问广东秦泰盛智能化科技有限公司网站

  广东秦泰盛全自动口罩机中文站 中文   Qin-tech Mask Machine English Station   English   |  返回首页         

新闻中心 | News Center

您的位置:全自动口罩机首页 > 口罩机资讯 > 全自动口罩机之图钉头带式鱼型口罩机

全自动口罩机之图钉头带式鱼型口罩机

一、基本介绍Basic introduction

图钉头带式鱼型口罩机秦泰盛公司依据客户需求,通过PLC编程控制,通过自动送料,压纹、对折、切边,翻转,焊接耳带等工艺一次成型,成功研发设计出全新的全自动鱼型口罩机,本机具有自动化程度高,操作简单,更人性化的特点。全自动口罩机

Fully automatic fish mask machine: According to customer needs, Qin-Tech is controlled by PLC programming, through automatic feeding, embossing, folding, trimming, flipping, welding ear straps and other processes at one time, successfully developed and designed a new automatic fish-shaped mask machine High degree, simple operation and more user-friendly features.

图钉头带式鱼型口罩机

二、图钉头带式鱼型口罩机设备技术参数 Technical Parameters

型号:AMM-1-2H

Model: AMM-1-2H

材料:两层无纺布两层熔喷布(最多可以到6层)

Material: 2 ply of non-woven and 2 ply of fabric(Up to 6 floors)

电压:AC 220V,50HZ

Voltage: AC 220V, 50HZ

重量:1500KG

Weight: 1500KG

外观尺寸

长宽高:12814(L)*1597.5(W)*1931(H)

Size:

Length, width and height:12814(L)*1597.5(W)*1931(H)

效率: 40 pcs/min(±10%)

Efficiency: 40 pcs/min(±10%)

产品规格:可依据客户要求进行定制

Product specifications: can be customized according to customer requirement.

适用行业:一次性医疗防护用品

Applicable industries: disposable medical protective equipment


图钉头带式鱼型口罩机

三、图钉头带式鱼型口罩机产品特性Product Features

整机由料架部分,上鼻线部分,超声波封边1,喷字母与LOGO两台,自动贴海绵,一次裁边,折边,超声波封边2,焊接耳带部分,二次裁边,成品下料,NG品检出,自动包装,成品流出,采用伺服电机,超声波焊接技术完成生产。

The whole machine consists of the material rack part, the upper nose line part, ultrasonic edge banding 1, spray letter and LOGO two sets, automatic sponge sticking, primary trimming, edge folding, ultrasonic edge banding 2, welding ear strap section, secondary trimming, finished product blanking, NG product detection, automatic packaging, finished product outflow, servo motor, ultrasonic welding technology to complete production.


1.料架部分:自动送料,刹车配合控制器,保证材料张力。

1. Material rack part: automatic feeding, brake cooperate with controller to ensure material tension.

2.鼻梁条部分:采用调速电机控制自动输送鼻梁条配合齿模超声波焊接

2. Nose bridge section: the cylinder is welded by ultrasonic wave, and the nose bridge is automatically conveyed

3.外形熔接部分:定制齿模配合超声波,完成纹路焊接。

3. Shape welding part: the mold is matched with ultrasonic wave to complete the texture welding.

4.折叠成型:折叠布料

4. Folding: folding fabric

5.外形切刀部分:定制切刀,滚切成型。

5. Shape cutter part: customized cutter, roll-cutting forming.

6.翻转部分:可根据口罩焊接方式实现翻转。

6. Flip part: turn the mask over.

7.头带钉制:采用全伺服控制效率高每分钟可高达40PCS(±10%)。

7. Headband install: Adopt full servo control, high efficiency, up to 40PCS per minute (±10%).

8.NG品检出:NG品自动抓至NG盛装箱中

8.NG product detection: The NG product will be automatically caught in the NG container

9.成品输出:口罩成品输出,收集。

9. Output of finished products: output and collection of finished masks.

10.自动包装

10. Automatic packaging

  • 本文由秦泰盛口罩机供应商进行编辑整理,如若转载,请注明出处。
  • 上一篇:全自动口罩机之焊接头带式鱼型口罩机介绍 下一篇:平面口罩机资讯之“全自动内耳带口罩机调试技巧”

    全自动口罩机相关文章

    技术文章